User manual

SETTING AND STARTING A PROGRAMME
1. Turn the programme knob. The related
programme indicator comes on.
2.
The indicator of button
4
flashes with
red colour.
3. The display shows the default tempera-
ture and spin speed. To change the
temperature and/or the spin speed,
press the related buttons.
4. Set the available functions. The indica-
tor of the set function comes on or the
display shows the related symbol.
5.
Press button
4
to start the pro-
gramme. The indicator of button
4
is
on.
The drain pump can operate for a short
time when the appliance fills water.
INTERRUPT A PROGRAMME
1.
Press button
4
. The indicator flashes.
2.
Press button
4
again. The washing
programme continues.
CANCEL A PROGRAMME
1.
Press button
1
to cancel the pro-
gramme and to deactivate the appli-
ance.
2.
Press button
1
again to activate the
appliance. Now, you can set a new
washing programme.
The appliance does not drain the wa-
ter.
CHANGE A FUNCTION
You can change only some functions be-
fore they operate.
1.
Press button
4
. The indicator flashes.
2. Change the function set.
SET THE DELAY START
1.
Press button
5
again and again until
the display shows the number of mi-
nutes or hours. The related symbols
comes on.
2.
Press button
4
, the appliance starts
the countdown of the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button
4
to start the
appliance, you can cancel or change
the set of the delay start.
You cannot set the delay start with the
Steam programme.
CANCEL THE DELAY START
1.
Press button
4
. The related indicator
flashes.
2.
Press button
5
again and again until
the display shows 0’.
3.
Press button
4
. The programme
starts.
OPEN THE LID
While a programme or the delay start oper-
ates, the lid is locked.
To open the lid:
1.
Press button
4
. You can open the lid
2 minutes after the appliance stops.
The door lock symbol in the display
goes off.
2. Open the lid.
3.
Close the lid and press button
4
. The
programme or the delay start contin-
ues.
If the temperature and level of the wa-
ter in the drum are too high, the door
lock symbol stays on and you cannot
open the lid . If necessary, do the fol-
lowing procedure to open the lid.
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that there is no water in
the drum.
Important! If you deactivate the appliance,
it is necessary to set the programme again.
AT THE END OF PROGRAMME
• The appliance stops automatically.
• The acoustic signals operate.
•
In the display
comes on.
electrolux 11