User manual

1
1
2
10. Remove the plastic piece.
11. Replace the plastic spacer with the
plastic cap. You can find this cap in the
user manual bag.
12. To install the appliance at the same lev-
el as neighbouring furniture, cut these
plastic pieces.
Warning! Remove all the packaging
and the transit bolts before you install
the appliance.
We recommend that you keep the
packaging and the transit bolts for
when you move the appliance.
POSITIONING AND LEVELLING
1. Pull the lever from right to left.
2. When the position of the appliance is
right, put back the lever.
A
3. Install the appliance on a flat hard floor.
4. Make sure that carpets do not stop the
air circulation below the appliance.
5. Make sure that the appliance does not
touch the wall or other units.
6. Loosen the feet to adjust the level.
Measure with a spirit level. Tighten the
pieces A.
7. A correct adjustment of the appliance
level prevents the vibration, noise and
the movement of the appliance when in
operation.
electrolux 19