User manual

• The appliance must be level and stable.
Caution! Do not put cardboard, wood
or equivalent materials below the
appliance feet to adjust the level.
THE INLET HOSE
90˚
1. Connect the hose to the appliance.
Loose the ring nut to set it in the cor-
rect position.
2. Connect the water inlet hose to the
cold water tap with 3/4 thread.
Caution! Make sure that there are no
leaks from the couplings.
Do not use an extension hose if the in-
let hose is too short. Contact the serv-
ice centre for the replacement of the in-
let hose.
Water-stop device
A
The inlet hose has a water stop device. This
device prevents water leaks in the hose be-
cause of its natural ageing. The red sector
in the window «A» shows this fault .
If this occur, close the water tap and con-
tact the service centre to replace the hose.
WATER DRAINAGE
There are different procedures to connect
the drain hose:
With the plastic hose guide.
• On the edge of a sink.
20 electrolux