User manual

To clean the drain filter:
1.
Open the drain filter door.
2.
Put a container below the recess of
the drain filter to collect the water
that flows out. Turn the filter until it is
vertical.
3.
Turn the filter fully and remove it.
4.
Remove fluff and objects.
5.
Clean the filter with water.
6.
Put it back and screw it in.
7.
Make sure that you tighten correctly
the filter to prevent leakages.
8.
Close the drain filter door.
11.6 The inlet hose filter and the
valve filter
WARNING!
• Disconnect the mains plug from
the mains socket.
To clean the water inlet filters:
1.
Close the water tap.
2.
Remove the water inlet hose from the
water tap.
3.
Clean the filter in the inlet hose with a
stiff brush.
4.
Remove the inlet hose behind the ap-
pliance.
5.
Clean the filter in the valve with a stiff
brush or a towel.
90˚
6.
Install again the inlet hose. Make sure
that the couplings are tight to prevent
leakages.
7.
Open the water tap.
ENGLISH 19