User manual

Programmes Load
(Kg)
Energy con-
sumption
(kWh)
Water con-
sumption (li-
tre)
Approximate
programme
duration (mi-
nutes)
Remaining
moisture
(%)
1)
Standard 60 °C
cotton
4 0.65 45 156 52
Standard 40 °C
cotton
4 0.49 44 156 52
1) At the end of spin phase.
Cold and hot water loading (The highest hot water temperature allowed is 55°C)
Programme Energy consumption
(KWh)
Water consumption
(litre)
Cottons 60 °C 0.75 72
Cottons 40 °C 0.45 72
Synthetics 60° 0.45 50
Synthetics 40° 0.24 50
Off Mode (W) Left On Mode (W)
0.48 0.48
The information given in the charts above are in compliance with the EU Commission regulation
1015/2010 implementing directive 2009/125/EC.
BEFORE FIRST USE
1. To activate the drain system, put 2 litre
of water in the main wash compartment
of the detergent dispenser.
2. Put a small quantity of detergent in the
main wash compartment of the deter-
gent dispenser. Set and start a pro-
gramme for cotton at the highest tem-
perature without laundry. This removes
all possible dirt from the drum and the
tub.
USING THE APPLIANCE
1. Open the water tap.
2. Connect the mains plug to the mains
socket.
3.
Press button
1
to activate the appli-
ance.
4. Put the laundry in the appliance.
5. Use the correct quantity of detergent
and additives.
6. Set and start the correct programme
for the type of laundry and soil.
LOADING THE LAUNDRY
1. Open the appliance door.
2. Put the laundry in the drum, one item at
a time. Shake the items before you put
them in the appliance. Make sure not to
put too much laundry in the drum.
3. Close the door.
Make sure that no laundry stays between
the seal and the door. There is a risk of wa-
ter leakage or damage to the laundry.
12 electrolux