User manual

4. Touch repeatedly the button
until the desired level appears (from
C01 to C07).
5. Touch the Start/Pause button to
confirm your choice and exit the
menu.
How to set the water softener
also during rinse phase
The factory setting allows to soften the
water during washing phase only. This
setting satisfies most of the use
condition. However, if the inlet water is
particularly hard (C06 and C07 levels),
we suggest to set the water softener also
during rinsing phase to preserve the
fabric softness.
Once you have entered the menu by
pressing and the buttons:
1. Touch the button. The goes
on.
This setting increases
the salt consumption.
2. Touch the Start/Pause button to
confirm your choice and exit the
menu.
How to deactivate the water
softener
Once you have entered the menu by
pressing and the buttons:
1. By touching the button twice, the
water softener is excluded
completely. The indicator
and
go off and the appears in
the display.
2. Touch the Start/Pause button to
confirm your choice and exit the
menu.
Water hardness levels
Levels Water hardness range
°f
(French de‐
grees)
°d
(German de‐
grees)
°e
(English de‐
grees)
mmol/l
C01 ≤5 ≤3 ≤ 4 ≤0.5
C02 6 - 13 4 - 7 5 - 9 0.6 - 1.3
C03 14 - 21 8 - 11 10 -15 1.4 - 2.1
C04
1)
22 - 29 12 - 16 16 - 20 2.2 - 2.9
C05 30 - 37 17 - 20 21 - 26 3.0 - 3.7
C06 38 - 45 21 -25 27 - 32 3.8 - 4.5
C07 ≥46 ≥26 ≥33 ≥4.6
1)
Factory setting, able to satisfy most of the use conditions.
ENGLISH 13