User manual

8.6 Extra Rinse
With this option you can add up to 3
rinses accordingly to the selected
washing programmes.
Useful for people allergic to detergents
and with sensitive skin.
The
indicator shows the selected
number of rinses.
This option increases the programme
duration.
If the Extra Rinse is set as a
default option and you select
a compatible washing
programme, the display
shows . In this case, by
pressing the Extra Rinse
button , it is possible to add
just one rinse.
8.7 Plus Steam
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing programme.
The steam phase reduces fabric
creasing and facilitates the fabric ironing.
The indicator flashes on the display
during steam phase.
This option can increase the
programme duration.
When the programme stops the display
shows a zero , the indicator is
steady on and the indicator starts
flashing. The drum performs smooth
movements for about 30 minutes to keep
the steam benefit. By touching any
button the anti-crease movements stop
and the door unlocks.
A small laundry load helps to
reach better results.
8.8 Eco
Set this option for slightly or normally
soiled items washed at 30°C or higher
temperatures.
The appliance decreases the washing
temperature and extends the washing
time to obtain a good washing efficiency
by saving energy. The display shows the
indicator .
If you select the Cotton
programme at 40°C or 60°C
and no other options are set,
the display shows the
indicator ; these are
the standard cotton
programmes, the most
efficient programmes in
terms of combined energy
and water consumption.
8.9 Time Save
With this option you can decrease the
programme duration.
• If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing programme. Touch this
button once to decrease the duration.
• In case of smaller load, touch this
button twice to set an extra quick
programme.
The display shows the indicator .
This option can also be used
to shorten the Steam
programme duration.
8.10 Skipping phase button
(Option)
By touching this button you can set:
• Only Rinse at first touch. The washing
programme starts from the rinsing
phase by skipping the wash phase.
All set options (except
permanent extra rinse)
are deselected
automatically.
• Only Spin at second touch. The
appliance skips wash and rinse
phase.
• Only Drain at third touch. The
appliance performs only the drain
phase.
ENGLISH 19