User manual
Ecological hints
• Set a programme without the prewash
phase to wash laundry with normal
soil.
• Always start a washing programme
with the maximum load of laundry
allowed.
• If you pre-treat the stains, you can
use a stain remover when you set a
programme with a low temperature.
• To use the correct quantity of
detergent, refer to the quantity
suggested by the detergent producer.
CARE AND CLEANING
:$51,1*
Refer to Safety chapters.
External cleaning
Clean the appliance with mild soap and
warm water only. Fully dry all the
surfaces.
&$87,21
Do not use alcohol, solvents
or chemical products.
&$87,21
Do not clean the metal
surfaces with chlorine-based
detergent.
Descaling
,I\RXXVHWKHVDOW
UHJXODUO\WRDFWLYDWHWKH
6RIW:DWHU7HFKQRORJ\WKH
GHVFDOLQJSURFHGXUH
GHVFULEHGLQWKLV
SDUDJUDSKLVQRW
QHFHVVDU\
If the water hardness in your
area is high or moderate, we
recommend that you use a
water descaling product for
washing machines.
Regularly examine the drum to check for
limescale.
The regular detergents already contain
water softening agents, but we
recommend to run a cycle with empty
drum and a descaling product
occasionally.
Always follow the
instructions that you find on
the packaging of the
product.
Maintenance wash
The repeated and prolonged use of low
temperature and short programmes can
cause detergent deposits, fluff residues,
bacterial growth and biofilm formation
inside the drum and the tub. This could
generate bad odours and mildew.
To eliminate these deposits and
hygienize the inner part of the appliance,
run a maintenance wash at least once a
month:
Remove all laundry from the drum.
Run a cotton programme with the
highest temperature with a small
quantity of powder detergent.
Door seal
Regularly examine the seal and remove
all objects from the inner part.
Cleaning the drum
Regularly examine the drum to prevent
rust particles.
For a complete cleaning:
Clean the drum with special products
for stainless steel.
(1*/,6+