User manual
• Make sure that all health and safety regulations are
obeyed when the appliance is installed in a commercial/
public environment.
• Do not install the appliance in a moving platform (e.g. on
a ship).
• Make sure that the floor where you install the appliance
is flat, stable, heat resistant and clean.
• Make sure that there is air circulation between the
appliance and the floor.
• The ventilation openings in the base (if applicable) must
not be obstructed by a carpet.
• Adjust the feet to have the necessary space between
the appliance and the carpet.
• Do not install the appliance where the appliance door
can not be fully opened.
• Do not put a container to collect possible water leakage
under the appliance. Contact the Authorised Service
Centre to ensure which accessories can be used.
1.3 Electrical Connection
• The appliance must be correctly earthed. The
manufacturer is not responsible for the consequences
of an inadequate earthing system.
• Always use a correctly installed shockproof socket.
• Make sure that the parameters on the rating plate are
compatible with the electrical ratings of the mains power
supply.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug and
to the mains cable.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
• Connect the mains plug to the mains socket only at the
end of the installation. Make sure that there is access to
the mains plug after the installation.
www.electrolux.com4