User manual

10.6 Activating the appliance
Press the button to activate the
appliance. A tune sounds (if it is activated).
10.7 Setting a programme
1. Turn the programme knob and set the
programme:
• The related programme indicator
comes on. A tune sounds (if it is
activated).
• The indicator of button
flashes.
• The display shows the programme
duration and the indicators of the
programme phases.
2. If necessary, change the spin time and
add the available options. When you
activate an option, the indicator of the
set option comes on.
If you set something
incorrect, the display shows
the message .
10.8 Coin operated machine
Insert correct amount of coins. When
inserting coins, the display on the coin
meter counts down to “00” (and then
or od) and the appliance is ready to start.
Press button to start the appliance.
The display shows the
message if the
washing cycle has not been
paid yet.
10.9 Starting a programme
without the delay start
Press .
• The indicator of stops to flash
and stays on.
• The indicator of the running phase
starts to flash on the display.
• The programme starts the door
locks.
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
• The display shows the
new value.
10.10 Starting a programme
with the delay start
1. Press Zeitvorwahl repeatedly until the
display shows the delay you want to
set.
The related indicator comes on the display
.
2. Press :
• The appliance starts the
countdown.
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press . To
cancel the delay start:
• Press to set the
appliance to pause.
• Press Zeitvorwahl until
the display shows '.
• Press
again to
start the programme
immediately.
10.11 Cancelling the delay start
To cancel the delay start:
1. Press button to set the appliance
to pause.
ENGLISH
17