User manual

The related indicator flashes.
2. Press button Zeitvorwahl repeatedly
until the display shows .
3. Press button again to start the
programme immediately.
10.12 Interrupting a programme
and changing the options
You can change only some options before
they operate.
1. Press .
The indicator flashes.
2. Change the options.
3. Press again.
The programme continues.
If the appliance is connected
to a coin operated machine,
you can interrupt a
programme only 5 minutes
after the programme start.
After this time the child lock
automatically activates.
10.13 Cancelling a running
programme
1. Press the button for some seconds
to cancel the programme and to
deactivate the appliance.
2. Press the same button again to
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
If the appliance is connected
to a coin operated machine,
you can cancel a programme
only 5 minutes after the
programme start. After this
time the child lock
automatically activates.
10.14 At the end of the
programme
The appliance stops automatically.
A tune sounds (if it is activated).
In the display comes on.
The indicator of button
goes off.
The door unlocks.
You can open the door.
Remove the laundry from the
appliance. Make sure that the drum is
empty.
Close the water tap.
Press the button for some seconds
to deactivate the appliance.
Keep the door ajar, to prevent the
mildew and odours.
10.15 AUTO OFF option
The AUTO OFF option automatically
deactivates the appliance to decrease the
energy consumption when:
You do not use the appliance for 5
minutes before you press .
Press the button
to activate the
appliance again.
After 5 minutes from the end of the
washing programme
Press the button to activate the
appliance again.
The display shows the end of the last
set programme.
Turn the programme knob to set a new
cycle.
www.electrolux.com18