User manual

5.
Measure out the detergent and the
fabric conditioner.
6.
Carefully close the detergent dis-
penser. Make sure that the flap does
not cause a blockage when you
close the drawer.
9.3 Setting and starting a
programme
1.
Turn the programme knob. The rela-
ted programme indicator comes on.
2.
The indicator of button
4
flashes
with red colour.
3.
The display shows the default tem-
perature and spin speed. To change
the temperature and/or the spin
speed, press the related buttons.
4.
Set the available functions. The indi-
cator of the set function comes on or
the display shows the related symbol.
5.
Press button
4
to start the pro-
gramme. The indicator of button
4
is on.
The drain pump can operate for a
short time when the appliance fills
water.
The appliance adjust automat-
ically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximately
15 minutes from the start of
the programme, the display
shows the new time value.
9.4 Interrupt a programme
1.
Press button
4
. The indicator flash-
es.
2.
Press button
4
again. The washing
programme continues.
9.5 Cancel a programme
1.
Press button
1
to cancel the pro-
gramme and to deactivate the appli-
ance.
2.
Press button
1
again to activate the
appliance. Now, you can set a new
washing programme.
The appliance does not drain the
water.
9.6 Change a function
You can change only some functions be-
fore they operate.
1.
Press button
4
. The indicator flash-
es.
2.
Change the function set.
9.7 Set the delay start
1.
Press button
5
again and again until
the display shows the number of mi-
nutes or hours. The related symbols
comes on.
2.
Press button
4
, the appliance starts
the countdown of the delay start.
When the countdown is completed,
the programme starts automatically.
Before you press button
4
to
start the appliance, you can can-
cel or change the set of the delay
start.
You cannot set the delay start
with the Steam programme.
9.8 Cancel the delay start
1.
Press button
4
. The related indica-
tor flashes.
2.
Press button
5
again and again until
the display shows 0’.
3.
Press button
4
. The programme
starts.
9.9 Open the door
While a programme or the delay start op-
erates, the appliance door is locked.
To open the appliance door:
1.
Press button
4
. The door lock sym-
bol in the display goes off.
2.
Open the appliance door.
18
www.electrolux.com