User manual

4. Place a container close to the pump to
collect any spillage.
5. Release the emergency emptying hose,
place it in the container and remove its
cap cover.
6. When no more water comes out, un-
screw the pump and remove it. Always
keep a rag nearby to dry up spillage of
water when removing the pump.
7. Remove any objects from the pump im-
peller by rotating it.
8. Put the cap back on the emergency
emptying hose and place the latter back
in its seat.
9. Screw the pump fully in.
10. Close the pump door.
Warning! When the appliance is in use
and depending on the programme
selected there can be hot water in the
pump. Never remove the pump cover
during a wash cycle, always wait until the
appliance has finished the cycle, and is
empty. When replacing the cover,
ensure it is securely re-tightened so as
to stop leaks and young children being
able to remove it.
Cleaning the water inlet filters
Important! If the appliance doesn't fill, takes
long to fill water, the starting button blinks
yellow or the display (if available) shows the
relevant alarm (see chapter "What to do if..."
for more details), check if the water inlet filters
are blocked .
To clean the water inlet filters:
1. Turn off the water tap.
20 electrolux