User manual

Symbols on the control panel :
= Handwash
= Child Lock
Display
9.1 9.2 9.3 9.4
9.9
9.8
9.79.69.5
9.1 - Spin Speed indicator, RINSE HOLD
, NIGHT CYCLE - symbols
9.2 - Drying degree indicator, allowed by the
set programme: IRON DRY
, CUP-
BOARD DRY
and EXTRA DRY - sym-
bols, selectable by pressing the button 3 ;
indicator AUTO, connected to the drying pro-
gramme and to button 4 .
9.3 - Programme progress indicator: PRE-
WASH
, MAIN WASH , RINSE ,
SPIN
, OVERDOSAGE , EXTRA
RINSE
, DRYING , DRYING ANTI-
CREASE phase
- symbols,
The programme progress display shows the
washing or drying phases of the selected
programme. During a cycle, a black line
blinks under the phase symbol of the running
programme. At the end of each phase, the
line under the corresponding symbol be-
comes fixed.
If the OVERDOSAGE symbol lights up at
the end of the programme, it indicates
that too much detergent has been used.
9.4 - DOOR
- symbol (Door locked)
• This symbol indicates if the door can be
opened:
– the symbol is on: the door cannot be
opened. The appliance is performing a
washing or drying programme.
– the symbol is off: the door can be
opened. The washing programme or
drying is finished.
9.5 - Options: PREWASH
, STAIN ,
SENSITIVE
, DAILY , SUPER QUICK
- symbols
9.6 - CHILD SAFETY LOCK
- symbol
9.7 - The display shows the following infor-
mation:
• Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for ex-
ample
) . The duration is calculated
automatically on the basis of the maximum
recommended load for each type of fabric.
After the programme has started, the time
remaining is updated every minute.
• Delay start
The selected delay (20 hours max) set by
pressing the relevant button appears on
the display for a few seconds (for example
), then the duration of the previously
selected programme is displayed.
The DELAY START symbol will appear on
the display. The delay time value decrea-
ses by one unit every hour and then, when
1 hour remains, the time decreases every
minute.
• Selected drying time
After selecting a drying programme, the
drying time is displayed in minutes and/or
hours (max 250 mins).
After the programme has started , the time
remaining id updated every minutes.
• Incorrect option selection
If an option, which is not compatible with
the set wash programme is selected, the
message Err is displayed for a few sec-
onds and the yellow light of button 7 starts
blinking.
•Alarm codes
6 electrolux