User manual

Measure out the detergent and the
fabric softener
Your new appliance was designed to reduce
water, energy and detergent consumption.
1. Pull out the dispenser drawer until it
stops. Measure out the amount of deter-
gent required, pour it into the main wash
compartment
and, if you wish to carry
out the prewash phase or to perform the
stain function, pour the detergent or the
stain remover into the compartment
marked
.
2. If required, pour fabric softener into the
compartment marked
(the amount
used must not exceed the MAX mark in
the drawer). Close the drawer gently.
Select the required programme by
turning the programme selector dial (1)
You can choose the right programme for any
type of laundry following the descriptions on
the washing programme tables (see «Wash-
ing Programmes»).
Turn the programme selector dial to the re-
quired programme. The programme selector
determines the type of washing cycle (e.g.
water level, drum movement, number of rin-
ses) and the washing temperature according
to the type of laundry.
By selecting a programme, the programme
progress indicator symbols and the symbol
corresponding to the drying degree allowed
by the set programme appear on the display.
The pilot light of button 7 starts blinking and
the display shows the duration of the selec-
ted programme.
The selector dial can be turned either clock-
wise or anticlockwise.
Position
corresponds to a cold wash, the
position
to Reset programme/ Switching
OFF of the machine.
At the end of the programme the selec-
tor dial must be turned to position
,
to switch the machine off.
If you turn the programme selector dial
to another programme when the ma-
chine is working, the yellow pilot light of
button 7 will blink 3 times and the mes-
sage Err is displayed on the display to
indicate a wrong selection. The machine
will not perform the new selected pro-
gramme.
Select the spin speed, NIGHT CYCLE or
RINSE HOLD option (button 2)
When the required programme has been
selected, your appliance automatically
proposes the maximum spin speed pro-
vided for that programme.
Press this button repeatedly to change the
spin speed, if you want your laundry to be
spun at a speed different from the one pro-
posed by the washer-dryer.
RINSE HOLD: by selecting this option the
water of the last rinse is not emptied out to
prevent the fabrics from creasing. At the end
of the programme, a blinking
and the
RINSE HOLD symbol appear on the display,
the DOOR symbol (door locked) remains lit
and the pilot light of button 7 goes off. The
door is locked to indicate that the water must
be emptied out.
NIGHT CYCLE: by selecting this option, the
machine will not drain the water of the last
rinse, so as not to wrinkle the laundry. As all
spinning phases are suppressed, this wash-
ing cycle is very quiet and it can be selected
8 electrolux