User manual

4. To use liquid detergent, turn the flap
down.
With the flap in the position DOWN:
– Do not use gelatinous or thick liquid
detergents.
– Do not put more liquid detergent
than the limit showed in the flap.
– Do not set the prewash phase.
– Do not set the delay start function.
5. Measure out the detergent and the fab-
ric conditioner.
6. Carefully close the detergent dispenser.
Make sure that the flap does not cause
a blockage when you close the drawer.
SETTING AND STARTING A PROGRAMME
1. Turn the programme knob. The related
programme indicator comes on.
2.
The indicator of button
6
flashes with
red colour.
3. The display shows the default tempera-
ture, the spin speed and the empty in-
dicator bars of the available functions.
4. To change the temperature and/or the
spin speed, press the related buttons.
5. Set the available functions.
6.
Press button
6
to start the pro-
gramme. The indicator of button
6
is
on.
The drain pump can operate for a short
time when the appliance fills water.
The appliance adjust automatically the cy-
cle time to the laundry you have put in the
drum to have perfect washing results in
the minimum necessary time. After ap-
proximately 15 minutes from the start of
the programme, the display shows the
new time value.
INTERRUPT A PROGRAMME
1.
Press button
6
. The indicator flashes.
2.
Press button
6
again. The washing
programme continues.
CANCEL A PROGRAMME
1.
Press button
1
to cancel the pro-
gramme and to deactivate the appli-
ance.
2.
Press button
1
again to activate the
appliance. Now, you can set a new
washing programme.
The appliance does not drain the wa-
ter.
CHANGE A FUNCTION
You can change only some functions be-
fore they operate.
1.
Press button
6
. The indicator flashes.
2. Change the function set.
SET THE DELAY START
1.
Press button
7
again and again until
the display shows the number of mi-
nutes or hours. The related symbols
comes on.
2.
Press button
6
, the appliance starts
the countdown of the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button
6
to start the
appliance, you can cancel or change
the set of the delay start.
You cannot set the delay start with the
Steam programme.
CANCEL THE DELAY START
1.
Press button
6
. The related indicator
flashes.
2.
Press button
7
again and again until
the display shows 0’.
3.
Press button
6
. The programme
starts.
OPEN THE DOOR
While a programme or the delay start oper-
ates, the appliance door is locked.
16 electrolux