User manual

4
BEFORE STARTING
1. Always operate the cleaner with the dust container installed.
2. Always operate the cleaner with the filter set property installed.
3. Insert the hose until the catch clicks to engage (press the catch to
engage hose).
4. Attach the metal extension tubes to the hose handle and the floor
nozzle.
5-6. Pull out the cable and plug it in. Press the foot pedal to rewind the
cable (take hold of the plug to prevent it striking you).
7. Press the On/Off button with control your foot to start the vacuum
cleaner. Adjust the suction power by using or the suction control on the
hose handle.
GETTING THE BEST RESULTS
Hard floors: Use the dual purpose floor nozzle with the left pedal in posi-
tion (8.)
Carpets: Use the dual purpose floor nozzle with the left pedal in
position (9.)
Turbo nozzle: Use the turbo nozzle to remove pet hairs and other
stubborn fibres (Z7120).
Reduce suction power for rugs and fabrics.
Upholstered furniture: Use the upholstery nozzle.
Skirting boards, crevices, corners, etc.: Use the crevice nozzle.
Above the floor surfaces and some upholstered furniture: Use the
dusting brush.
1
2
3
4
5
6
7
8
9
z71xx_ifu.qxp 2005.11.11. 11:37 Page 4