User manual

7
TROUBLESHOOTING AND CUSTOMER INFORMATION
Troubleshooting
The vacuum cleaner does not start
1. Check that the cable is connected to the mains.
2. Check that the plug and the cable are not damaged.
3. Check for a blown fuse.
The vacuum cleaner stops
1. Check whether the dust container is full. If so, empty it.
2. Is the nozzle, tube or hose blocked?
3. Are the filters blocked?
Water has entered the vacuum cleaner
It will be necessary to replace the motor by an authorised Electrolux serv-
ice engineer.
Damage to the motor caused by the penetration of water is not covered by
the warranty.
Customer Information
Electrolux decline all responsibility for all damages arising from any
improper use of the appliance or in cases of tampering with the appliance.
This product is designed with the environment in mind. All plastic parts are
marked for recycling purposes.
For further details see our website: www.electrolux.com
For repairs or accessories, contact the Electrolux Group Floorcare
Helpline on 08706 055 055.
If you have any comments on the cleaner or the Instructions for Use
booklet please e-mail us at: [e-mail]
The symbol on the product or on its packaging indicates that this product may
not be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, whic could otherwise be caused by inapprprate
waste handling of this product. For more detailed information about recycling of this
product, please contact your local city office, your household waste disposal service or
the shop where you purchased the product.
z71xx_ifu.qxp 2005.11.11. 11:37 Page 7