Cut Sheet

RFI Series
Commercial Fan Forced Heater
Solutions for maintaining comfort in
areas subject to cold drafts, such as
vestibules, stairwells, etc.
mounting ceiling or wall
applications
Applications
stairwells, kiosks
Features
• Quick response of
fan-forced heat when
required
• Automatic fan delay to
remove residual heat when
unit cycles off
• Recessed or surface
• 50/60 cycle rating
• Exclusive aesthetically
pleasing front panel trim
• Access door can be
locked for tamperproof
• Vestibules, entrance ways,
RFITF
T-bar Ceiling Mount
Trim (white only)
RFI Series
Specifications
Voltage 208, 240, 277V
Wattage Five sizes ranging from 1125 to 4800W
Color Almond or White
Finish Polyester epoxy powder coat painted finish.
Construction The front panel is constructed of 20 gauge steel. The wall box is
Heating
element
Motor &
Fan
Controls &
wiring
Warranty
designed for recessing into either frame or masonry walls and contains
knockouts for wiring connections.
The RFI wall heater has a nickel chromium resistance wire
heating element within a steel sheath. Spiral steel fins are firmly
brazed to the surface to provide excellent heat transfer.
The fan motor is totally enclosed and factory lubricated complete with a
black anodized 5 blade mixed flow aluminum fan. The fan delay is a bi-
metallic snap action type.
The heater has a standard double pole built-in thermostat
with provision for low voltage relay and remote wall stat if required.
Unit is also suitable for use with remote line voltage wall thermostat.
One year on complete unit. UL and CSA approved.
®
20 | COMMERCIAL HEATERS TO ORDER PLEASE CALL 1-800-668-6663 OR FAX [phone]
TO TABLE OF CONTENTS