User`s manual

THE PATTERN SEQUENCER

MINIMISING THE MUTE WINDOW

While the MUTE window is active it occupies a large portion of the LCD screen. This can

e disturbing if you want to work with mutes at the same time as you want to access the

sound parameters.

To avoid this problem, the MUTE window transforms to a small centered window when a

DATA ENTRY knob is accessed while in MUTE mode. To return to the big MUTE window,

press the [ENTER/YES] button.

• In songs, mutes can be programmed specifically per row. For more information,

see section “SONG MUTE” on page 55.

• A muted track remains muted, even when the pattern is changed or if SONG mode

is entered or exited.

• Drums already trigged and still making sounds will continue to sound when

muted, but further trigs will be masked. This allows the drums to fade out in a nat-

ural way.

ACCENT TRACK

The Accent feature is used for quickly changing the accentuation for either a pattern as a

whole or for individual tracks. Accent raises the volume at selected positions within a pat-

tern or a track.

1. Hold down the [FUNCTION]

key while pressing the [B/F] key. This brings forth the

ACCENT window.

2. The accent value is set in steps up to 15, using [UP] and [DOWN] or the SOUND

SELECTION wheel.

3. Toggle the steps to be accented by pressing the [TRIG] keys. Accent is per default set to

ALL and will therefore affect the whole pattern. Place accents by pressing the [TRIG]

keys. Press the [RIGHT] arrow key if you want to accent individual tracks.

4. Move on to the next accent track by holding down [

FUNCTION] and pressing the [TRIG]

key corresponding to the track whose accent you want to set.