User`s manual

GLOBAL SETTINGS
66
2. Select the MIDI row in the GLOBAL EDIT menu. Then select SYSEX REC and press
[ENTER/YES].
3. Select the VERF receive method using the [UP] and [DOWN] arrow keys.
4. Press [
ENTER/YES] to start receiving data. The message “WAITING...” shows up in the
menu.
5. Initiate the data send from the sending device.
6. When the dump is finished you will see how many messages that were received and if
the dump contained any errors. No information has been overwritten.
PROGRAM CHANGE
The SPS-1 MKII/SPS-1UW MKII can both transmit and receive MIDI Program change
messages. Here you decide how the Machinedrum should react to these messages.
1. Select the MIDI row in the GLOBAL EDIT menu. Then select PRG CHANGE and press
[
ENTER/YES].
2. You will be presented with available alternatives for handling program changes. When
the program change setting is set to OFF, the Machinedrum will neither transmit nor
receive program change messages. If set to IN the Machinedrum will respond to incom-
ing program changes, but will not send out any program change data when a new pat-
tern is selected. If set to OUT the Machinedrum will send program change messages
when a new pattern is selected, but will not respond to incoming program changes.