Datasheet

ManualsBrandsElectronic Assembly ManualsDisplaysLCD-graphic display 128 x 64 3.3 V FSTN

DOGL GRAPHIC SERIES

128x64 DOTS

2.2012

Zeppelinstraße 19

D-82205 Gilching

Phone +49-(0)8105-778090

Fax: +49-(0)8105-778099

www.lcd-module.de

info@lcd-module.de

EA DOGL128B-6 +

EA LED68x51-W

EA DOG

L128W-6 +

EA LED68x51-A

EA DOG

L128W-6 +

EA LED68x51-W

TECHNICAL DATA

* HIGH-CONTRAST LCD SUPERTWIST DISPLAY (STN AND FSTN) WITH 15µm DOT GAP

* OPTIONAL LED BACKLIGHTS IN VARIOUS COLORS

* 128x64 PIXELS (CORRESPONDS TO 8x21 CHARACTERS OR 4x16 LARGE CHARACTERS)

* ST 7565R CONTROLLER WITH SPI (4-WIRE) INTERFACE

* POWER SUPPLY: SINGLE SUPPLY 3.0V TO 3.3V (TYPICALLY 320µA)

* NO ADDITIONAL VOLTAGES REQUIRED

* OPERATING TEMPERATURE RANGE -20°C TO +70°C (STORAGE -30°C TO +80°C)

* LED BACKLIGHTING 5mA TO 90mA

* NO MOUNTING REQUIRED: SIMPLY SOLDER ONTO PCB

ORDERING CODE

GRAPHICS DISPLAY, 128x64, 68x51mm EA DOGL128x-6

x: W = white background (FSTN pos. transflective)

E = yellow/green background (STN pos. transmissive)

B = blue background (STN neg. transmissive)

S = black background (FSTN neg. transmissive)

L = yellow/green background (STN pos. reflective, cannot be backlit)

LED BACKLIGHT, WHITE EA LED68X51-W

LED BACKLIGHT, YELLOW/GREEN EA LED68X51-G

LED BACKLIGHT, BLUE EA LED68X51-B

LED BACKLIGHT, RED EA LED68X51-R

LED BACKLIGHT, AMBER EA LED68X51-A

LED BACKLIGHT, GREEN EA LED68X51-E

LED BACKLIGHT, FULL COLOR RGB EA LED68X51-RGB

ACCESSORIES

USB TEST BOARD FOR PC (WINDOWS 2000, XP, VISTA) EA 9780-2USB

TOUCH PANEL, 4-WIRE, ANALOG, STICK-ON EA TOUCH128-2

ZIF CONNECTOR FOR TOUCH PANEL, BOTTOM CONTACT EA WF100-04S

SOCKET CONNECTOR 4.8 mm HEIGHT (2 PCS. REQUIRED) EA FL-20P

CHARACTER SETS PLUS FONTEDITOR EA USBSTICK-FONT

also available in low quantities !

flat: 6.5mm with LED B/L mounted

Summary of content (8 pages)

PAGE 1
2.2012 DOGL GRAPHIC SERIES 128x64 DOTS ! ntities a u q ow ounted le in l m b L a l / i B a v also a ith LED w m .
PAGE 2
EA DOGL128-6 Page 2 ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved. EA DOGL128 The EA DOGL128, a 128x64-pixel graphics display, is a new addition to ELECTRONIC ASSEMBLY’s EA DOGL series. It, too, has pins that allow it to be mounted quickly and easily. 7 different optional LED backlights are available. These can be combined with 5 different display technologies, making it possible to have up to around 20 different designs.
PAGE 3
ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved. EA DOGL128-6 Page 3 5 DIFFERENT TECHNOLOGIES See below for an overview of available technologies, combinations with available backlights and their usability: display type technology optional backlight readability display color non backlighted display color with backlighted recommended backlight color FSTN pos.
PAGE 4
ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved. EA DOGL128-6 Page 4 APPLICATION EXAMPLES LOW POWER +3.0V or +3.3V (single supply) operation requires 9 external capacitors LOW VOLTAGE If an external source of +10.5..+13.5V (does not have to be stabilized) is available, the charge pump is not needed and less external components are required. Power supply voltage for display and logic may be 1.8..3.3V then.
PAGE 5
ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved. EA DOGL128-6 Page 5 TABLE OF PROGRAMMING COMMANDS DATA TRANSFER Data transfer is unidirectional. That means that data can only be written; it cannot be read again. In contrast to other displays, a busy query is not necessary with this display. The clock-pulse rate of the SCL line can be up to 20 MHz at 3.3V, depending on the supply voltage.
PAGE 6
ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved. EA DOGL128-6 Page 6 INITIALISATION EXAMPLE Using the internal contrast voltage generator (single supply +3.0..+3.3V). Application „LOW POWER“. Initialisation example for single supply +3.
PAGE 7
ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved. EA DOGL128-6 Page 7 12:00 VIEWING ANGLE, TOP VIEW OPTION If the display is read mostly from above (on the front of a laboratory power supply unit, for example), the preferred angle of viewing can be set to 12 o’clock. This rotaties the display by 180°. A slightly different initialization setup is required for this.
PAGE 8
ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved.