Quick Reference Guide

Part 2: Perform Data Run
1) Place the M.O.L.E. Profi ler in the
appropriate thermal barrier, making sure
the thermocouple and/or sensor wires
are not damaged.
2) After the oven temperatures stabilize,
turn the M.O.L.E. Profi ler on and press
the
Record
button.
Never permit the M.O.L.E.
Profi ler to exceed the
absolute maximum warranteed
internal temperature, as
permanent damage may result.
The instrument warranty will not
cover damage caused by
exceeding the maximum
specifi ed internal temperature.
You must press the
Record
button even if the Trigger
Temperature or Points Delay
parameters are confi gured.
3) Pass the thermally protected
M.O.L.E. Profi ler and test assembly
through the machine.