Quick Reference Guide

4) As the test assembly and M.O.L.E.
Profi ler emerge from the machine, carry
the test assembly with sensors attached
and the M.O.L.E. Profi ler in the Thermal
barrier to a table or fl at surface.
It is highly recommended that
protective gloves are used when
retrieving the thermal barrier
from the oven and when opening
the thermal barrier.
If a sensor is removed before the
M.O.L.E. Profi ler has stopped
collecting data, the data for that
channel might become distorted.
5) Open the thermal barrier and if
the Activity LED is still fl ashing this
means the M.O.L.E. Profi ler is still
recording and it must be stopped.
6) Remove the M.O.L.E. Profi ler from
the Thermal barrier. Handle it carefully,
as the case may still be warm.
7) Disconnect the sensors from the
M.O.L.E. Profi ler and place it near the
computer.