User's Manual Part 2

MEGAM.O.L.E.® Help System Guide ♦150♦
5.4.4.2.2. Data Plots
The Data Plots in the Data Graph represent the data for each of the sensors connected
to the M.O.L.E. Profiler. Each sensor is represented by a different color that
corresponds to the color of its sensor location description in the Data Table.
A Data Plot in the Data Graph can be suppressed or restored at any time by clicking the
channel check box with the corresponding sensor description in the Data Table. This
allows the user to view any combination of the Data Plots or individually.
When two or more Data Plots overlap the same values, the Data Plots
overwrite each other. For example, if the Data Plot that represents the
sensor connected to channel 5 and channel 1 have the same value, the
channel 5 Data Plot will only appear unless the user suppresses it.
When printing a Data Graph in black and white, suppressing one or more Data Plots is
useful for clearing a view of a Data Plot that is obscured by others near it. The Notes
tool can also be used to help identify each Data Plot. Refer to topic
Software>Menus>Tools>Notes
for more information.