User's Manual Part 2

MEGAM.O.L.E.® Help System Guide ♦184♦
5.4.4.3.1.2. Specification Limit Indicators
Each Parameter displayed on the Data Tab can have both Lower and Upper
specifications applied. If a specification limit is violated, the software displays a red or
blue indicator on the left edge of the Data Table cell.
If a USL has been exceeded, that parameter indicator will appear in red (indicating it is
above the specification limit). If a parameter is less than the user specified LSL, that
parameter indicator will be appear in blue (indicating below the specification limit).
Refer to topic Software>Page Tabs>Profile>Data Table>Template>Add &
Edit Content Wizard for information on how to apply LSL and USL
values.