User's Manual Part 2

♦199♦ MEGAM.O.L.E.® Help System Guide
5.5.1.1.1. Fresh Start
The Fresh Start workflow is a wizard that starts a new profile (data run) by entering
Machine (oven), Assembly (board) and Process (Paste) information.
The Fresh Start workflow:
1) Connect the M.O.L.E. to the PC. Refer to Basics>Setup>Communications
Setup for more information.
2) On the File menu, cllick New. A message box appears with the three workflow
wizard options.
3) On the Start dialog box, click the Fresh Start command button and the workflow
wizard appears.
When navigating through the wizard, the step list on the left uses a color key
to inform the user of the current step, steps that have been completed and
remaining steps.
Current Completed Remaining
4) Select the desired instrument from the list box to make active. If there are none
listed, click the Scan for Instruments command button to detect all available
instruments.