User's Manual Part 2

1) On the File menu, click Preferences, and then click the M.O.L.E.(r) tab.
2) In the Calibration Interval section, select 6 or 12 months from the drop down
box.
3) Select the Apply or OK command button to save.
Update Firmware
If a new version of the MEGAM.O.L.E.® Profiler firmware is released by ECD, the user
can use the Update Firmware wizard to upgrade to the newest version.
To update MEGAM.O.L.E.® Profiler firmware:
1) On the File menu, click Preferences, and then click the M.O.L.E.(r) tab.
2) In the MOLE section, click the Update Firmware command button and the
software automatically scans for a selected instrument. If there is no instrument
selected, the Select Instrument dialog box appears.
3) Select the OK command button.
Updating the MEGAM.O.L.E.® Profiler firmware erases any stored data runs.
Make sure they have been downloaded prior to completing this process.
4) Click the Yes command button to proceed with the update or No to cancel.