User's Manual Part 2

user will not be able to access the protected worksheet without proper password
privileges. When protecting the Engineer mode, the user will not have access to engineer
mode features.
If there are password protected features, data will not be affected when uploading from
the M.O.L.E. profiler.
To change the password:
1) On the File menu, click Preferences, and then click the Profile tab.
2) In the Password section, click the Change Password command button and the
Password Change dialog box appears.
The software has a default password Admin
. When the password is changed
for the first time, Admin will need to be entered in the Current Password text
box.
3) Enter current password in the Current Password text box.
4) Enter a new password in the New Password text box.
The software only accepts passwords with a minimum of 4 characters.
5) Enter the new password again in the Confirmation text box and then click the OK
command button to accept or Cancel to not change the password.
Mode
Select the corresponding check box to password protect the Engineer Mode. If password
protection has been selected, a dialog box appears prompting the user to enter the
current password. The software will then need to be restarted to apply password
protection settings.
If the default password has not been changed, the current password is
Admin. Refer to topic
Software>Menus>File>Preferences>Misc>Passwords for more
information.