User's Manual Part 2

This is available when in Engineer Mode.
To zoom 100%:
1) On the View menu, click 100% to restore current Page Tab view to the default.
The 100% command can be accessed on all Page Tabs excluding the Profile
Page Tab.
5.5.3.7. Load Default Template
Template data calculations are highly customizable. When a user has changed one, the
user can use the Load Default Template to discard all modifications and restore the
default template specified in Software>Menus>File>Preferences.
Templates are automatically loaded every time the software is started and is
used as the default template for every downloaded data run. Template files
are specified on the Preferences property sheet. Refer to topic
Software>Menus>File>Preferences for more information.
This is available when in Engineer Mode.
To load a default template:
1) On the View menu, click Load Default Template to load the default template.
This command can also be accessed by right-clicking over a template.
5.5.3.8. Load Template
Since the software allows the user to create different templates use the Load Template
command to apply a template file to any data run in the working directory.
This is available when in Engineer Mode.
To load a template:
1) On the View menu, click Load Template.