User's Manual Part 2

2) On the File menu, cllick New. A message box appears with the five workflow
wizard options.
3) On the Start dialog box, click the Create T10 using an OvenCHECKER option,
then click the Create T-10 Spec command button and the workflow wizard
appears.
When
navigating through the wizard, the step list on the left uses a color key
to inform the user of the current step, steps that have been completed and
remaining steps.
Current Completed Remaining
4) Select the desired instrument from the dialog box to make active. If a V-M.O.L.E.®
Profiler has already been selected during a different process, the software
automatically selects the COM port previously used.
If the software does not detect a M.O.L.E. Profiler, using the communication
cable connect it to the computer and click the Scan for Instruments
command button to search again. M.O.L.E.® MAP software allows multiple
instruments to be connected to a computer at one time. Selecting the Scan for
Instruments command button will detect all instruments and display them in
the dialog box. If no instrument is detected the software displays all of the
Demonstration thermal profilers to select from.