User's Manual Part 2
14) After the oven stabilizes, turn the V-M.O.L.E.® Profiler on and press the record
button.
15) Pass the OvenCHECKER™ through the machine.
16) Once the OvenCHECKER™ has been retrieved from the machine and the
V-M.O.L.E.® Profiler has been stopped, disconnect the V-M.O.L.E.® Profiler from
the OvenCHECKER™ and place it near the computer. Since you are creating a
new Target 10 Specification, the OK button on the V-M.O.L.E.® does not need to
be pressed at this time as contains an old Target 10 Specification.
If the V-M.O.L.E.® Profiler already contains an previously recorded
OvenCHECKER™ data run, a new data run does not need to be performed.
17) Select the desired OvenCHECKER™ data run and then click the Read command
button to read the data run from the V-M.O.L.E.® Profiler.