User's Manual Part 2

If the software does not detect a M.O.L.E. Profiler, using the communication
cable connect it to the computer and click the Scan for Instruments
command button to search again. M.O.L.E.® MAP software allows multiple
instruments to be connected to a computer at one time. Selecting the Scan for
Instruments command button will detect all instruments and display them in
the dialog box. If no instrument is detected the software displays all of the
Demonstration thermal profilers to select from.
4) Click the OK command button to accept or Cancel to quit the command.
5.5.5.2. Instrument Status
This command displays the health of the M.O.L.E. Profiler such as battery charge,
internal temperature, thermocouple temperatures. This command also allows the user to
display items that will prevent the user from completing a successful data run.
This is available in both Engineer & Verify Modes.
To display the instrument status:
1) On the M.O.L.E. menu, click Instrument Status and the dialog box appears.