User's Manual Part 2

10) Select the Finish command button to complete the wizard and display the new
calculation data in the selected template cell.
5.4.4.3.1.2. Specification Limit Indicators
Each Parameter displayed on the Data Tab can have both Lower and Upper
specifications applied. If a specification limit is violated, the software displays a red or blue
indicator on the left edge of the Data Table cell.
If a USL has been exceeded, that parameter indicator will appear in red (indicating it is
above the specification limit). If a parameter is less than the user specified LSL, that
parameter indicator will be appear in blue (indicating below the specification limit).