User's Manual Part 2

5.4.4.3.3. Channel Check Boxes
The Channel check boxes control whether the associated Data Plot is displayed on the
Data Graph and whether the data for that channel are included in the data table
calculations.
To turn a Data Plot ON or OFF:
1) Click the channel check box beside a Sensor location description to turn it “ON” or
“OFF”.
The user can click the Show All
check box to turn all channels “ON” or “OFF”.
This is helpful when a data run has a large amount of channels and they want
to view a smaller amount. To achieve this, click the Show All check box to turn
all channels “OFF”. Then click the desired channel check boxes to turn them
“ON”
5.4.4.3.4. Value Pop-up
Each value in the Data Table can be displayed as a Value Pop-up. A Value Pop-up is
graphically illustrated on the Data Graph showing how and where that value was
extracted from the profile.