User's Manual Part 2

8) Select the Finish command button to complete the wizard and display the new
calculation data in the selected template parameter column.
5.4.3.2.2. Specification Limit Indicators
Each Parameter displayed on the Spreadsheet Page Tab can have both Lower and
Upper specifications applied. If a specification limit is violated, the software displays a red
or blue indicator on the left edge of the Data Table cell.
If a USL has been exceeded, that parameter indicator will appear in red (indicating it is
above the specification limit). If a parameter is less than the user specified LSL, that
parameter indicator will be appear in blue (indicating below the specification limit).