User`s manual

14
• EASY TUNE: visualizes the value of the transposition applied to
the song being played.
2. “OUT EQ” : to adjust the output global equalization.
The adjustable parameters are:
 TREBLE : high frequencies;
 BASS : low frequencies.
3. “MIC EQ” : to adjust the equalization of the microphone inputs Mic 1
and Mic 2.
The adjustable parameters are:
 HIGH : high frequencies;
 MID F : MID intervention frequency;
 MID : medium frequencies;
 LOW : low frequencies.
NOTES:
On the medium frequencies the equalizer is of the “semi-parametric”
type. Through the parameter “MID F” it is possible to adjust the
frequency on which intervene, enhancing or easing it up through the
“MID” parameter.
This means that intervening exclusively on the “MID F” parameter no
tonal variation will be heard. The intervention frequencies start from
110hz (identified as low frequencies) up to 1800hz (identified as high
frequencies, or high pitched) and cover the range of frequencies not
modifiable by the “HIGH or “LOW” regulations.
A practical example to understand the regulation of the semi-parametric
filter: enhance the “MID” parameter, then, speaking in the corresponding
microphone move as you please the parameter “MID F”. It will be then
possible to hear the different frequencies to enhance (or ease up) using
the “MID”.
4.“MIC FX ”. To adjust the type and quantity of the effect for the Mic1 and
Mic2.
The adjustable parameters are:
• DELAY TYPE : it is possible to choose among three types of delay: