User`s manual

Once TRKCHANG is activated, the function keys have assigned the

following functions:

• RESTORE: zeroes all the variations to the parameters done by the

user and restores the presets originally memorized in each song;

• SAVE: saves the modifications done by the user through the

function SAVE;

• RELOAD: recalls the last values saved by the user through the

function SAVE;

• MUTE: it mutes a track (same as zeroing the volume of the

corresponding MIDI channel) if on the status bar CHANNEL

VOLUME TRKCHANG is underlined;

• SOLO: it puts to “solo” the underlined channel if on the status

CHANNEL VOLUME TRKCHANG is not underlined;

NOTES: All the variations done through the function

TRKCHANG

do not

modify in any way the parameters memorized into a song.

To understand the way in which

TRKCHANG

works on a song, it is

possible to imagine a chart paired to the song, in which all the variations

on the default song values done by the user are memorized (+/- values).

For instance let’s imagine a song with the volume on the MIDI channel

n°2 recorded with the following progression:



first measure (beat 1.1) set to Volume=100



tenth measure (beat 10.1) set to Volume=110

When the song is in PLAY, on the M-Blaster display (in correspondence

to the MIDI channel n°2 volume) we will read the value “100” until the

tenth measure, after that we will read “110”.

Let’s imagine we set via the knob PAGE/VALUE a variation on the

channel 2 volume equal to “-020” (saving the variation with the function

key SAVE).