User`s manual

14
• MIDI REVERB: to adjust the global quantity of the reverberation
effect on the MIDI songs; this parameter is saved.
• MIDI VOLUME: to adjust the quantity of volume only for the midi
files. You should put this parameter on level 0, if you want to use
MBlaster2 with an external expander, maintaining the audio
functionalities (microphone, MP3).
• MUTE TRACK: to choose the intervention channel of the function
key TRKON/OFF. The factory preset value is 4, a MIDI channel to
which is usually assigned the melody track; this parameter is
saved.
• EASY TUNE: visualizes the value of the transposition applied to
the song being played.
2. “OUT EQ” : to adjust the output global equalization.
The adjustable parameters are:
 TREBLE : high frequencies;
 BASS : low frequencies.
3. “MIC EQ” : to adjust the equalization of the microphone inputs Mic 1
and Mic 2.
The adjustable parameters are:
 HIGH : high frequencies;
 MID F : MID intervention frequency;
 MID : medium frequencies;
 LOW : low frequencies.
NOTES:
On the medium frequencies the equalizer is of the “semi-parametric”
type. Through the parameter “MID F” it is possible to adjust the
frequency on which intervene, enhancing or easing it up through the
“MID” parameter.
This means that intervening exclusively on the “MID F” parameter no
tonal variation will be heard. The intervention frequencies start from
110hz (identified as low frequencies) up to 1800hz (identified as high
frequencies, or high pitched) and cover the range of frequencies not
modifiable by the “HIGH or “LOW” regulations.