User`s manual

A practical example to understand the regulation of the semi-parametric

filter: enhance the “MID” parameter, then, speaking in the corresponding

microphone move as you please the parameter “MID F”. It will be then

possible to hear the different frequencies to enhance (or ease up) using

the “MID”.

4.“MIC FX

”. To adjust the type and quantity of the effect for the Mic1 and

Mic2.

The adjustable parameters are:

• DELAY TYPE : it is possible to choose among three types of delay:

Mono/Stereo/Triple;

• DELAY LEVEL : quantity of delay effect;

• REVERB SEND : quantity of reverberation;

• CHORUS SEND : quantity of chorus effect.

“EXIT” to leave the page “PARAM.”

TRKCHANG (TRACK CHANGE)

Adjust customized parameters of each song (volumes/effects /transposition /time etc)

During the playback it is possible to adjust and save customizations for

each single song pressing the TRKCHANG function key (activated during

the song playback).

The TRKCHANG page is different depending on the type of file played,

MIDI or audio (MP3).

NOTE: As the effect generator (reverberation and chorus) is common

between the MIDI playback and the MIC1/2, it is possible that the

reverberation and/or chorus characteristics can modify depending on the

type of messages coming from the MIDI file in playback.

PARAMETERS FOR MIDI FILES

To be able to adjust the volume, the effects, the transposition, the

metronomic time and other parameters on a MIDI file, it is necessary to

select the function TRKCHANG.