User`s manual

(to restart the song playback from the point where it was paused). You can also

push the PLAY button again to restart the song from the beginning.

NOTE: The song that is playing is always the one highlighted with the arrow

buttons. If one song is playing then another one is highlighted pushing the PLAY

button will stop the first song and the new song will start immediately. If a song is

interrupted with the STOP button read the following:

After halting a song with the STOP button and highlighting another one, using the

PLAY button will start the song from the beginning. Using the CONTINUE

function will resume the first song playing (from the point where it was halted).

PARAM. (Parameters)

Press the PARAM. button while a song is playing to access the “Parameters”

page where it is possible to adjust the MIDI and Audio parameters in real time

(during playback). All parameters can be changed using the adjustment

knob (fig. 1/1).

The function keys in PARAM permit the selection of the following pages:

1. MIDI, which enables adjustment to the following:

 MIDI TRANSPOSE: This adjusts the global transposition (of all the MIDI

files). The value can be varied by 12 semitones before or during the song

playback. This parameter will be active until the equipment is turned off.

 MIDI REVERB: This adjusts the global quantity of the reverberation effect

on MIDI tracks.

 MUTE TRACK: This enables you to choose which track is the melody

track (in case you would like it muted with the TRKON/OFF function. The

TRKON/OFF factory preset value is 4 as the melody track is usually

assigned to this MIDI channel.

 EASY TUNE: Shows the ‘easy tune’ value (+4 semitones for male, 0 for

normal or -4 for female).

2. “OUT EQ”: This adjusts the output global equalization.