User`s manual

17
Variations can be made on the following parameters:
 VOL (Volume)
 TRN (Transpose)
 PRG (Program change)
 BNK (Bank select)
 REV (Reverberation)
 CHR (Chorus)
 PAN (Panpot)
 TEMPO (metronomic time)
Use the arrow buttons to highlight a parameter of the lower part to work on. You
can also globally modify all the MIDI channels using the adjustment knob (fig.
1/1). In that case the modifications shown on the status bar will be those of
GLOBAL followed by the name of the parameter in use and from the word
TRKCHANG. It is impossible to make global changes to PROGRAM CHANGE or
BANK SELECT.
Using the arrow buttons to move to the upper part (the status bar will read the
word “CHANNEL” followed by the name of the variation in use and by the word
TRKCHANG) you can adjust the parameter in use of the particular midi channel
on which the arrow buttons are highlighting. The upper bar reports the name of
the instrument assigned to the MIDI channel where the arrow buttons are
positioned and the value of the parameter in use, visualized as a variation (-/+)
set by the user for that channel.
NOTE: on channel 10 transposing is only possible in “CHANNEL” mode
The usable function keys in the TRACK CHANGE page have the same function
as in the previous operative systems: RESTORE, SAVE, RELOAD and MUTE
with the addiction of a new one that changes its use depending on the parameter
it is working with.
More precisely:
“MUTE”: This is only visualized when working on the volume parameter. Pushing
this function key changes the track on which the arrow buttons are positioned.