User Manual Part 1

CHAPTER 1
STARTING OUT
Revised: 15 Oct 03 1-1 EST P/N AA104
BEFORE YOU START
Congratulations on your purchase of the ESTeem Wireless
Modem! This section of the manual will describe the basic
functioning and programming of the ESTeem to get your
wireless network up as soon as possible. It is
recommended that any first time user of the ESTeem and
those that are unfamiliar with its operation complete all
steps in this section before proceeding.
Take a few minutes to inventory your equipment before
you proceed. Report any missing or damaged items to
Customer Support as soon as possible. We at Electronic
Systems Technology, Inc. (EST) are constantly trying to
improve our products and support system so if you have
any comments or suggestions on improvement of this
manual, please contact us at [phone].
The completion of this section requires loading the ESTeem Utility
program on your computer. The following section will describe the
installation and use of this valuable utility program.
ESTEEM UTILITY
The ESTeem Utility is designed to assist the ESTeem user in
programming and troubleshooting. The Utility covers basic
operation, programming, PLC applications, and diagnostics of the
ESTeem. The ESTeem Utility Program is designed to operate with
Windows ®.
Installing ESTeem Utility Software From ESTeem
Resourse Disk (AA109)
The ESTeem Resource Disk is stand-alone copy of the ESTeem
Web site (Figure 2). Navigation of the Resource Disk is as simple
as using your web browser. All technical documentation, User’s
Manuals and the ESTeem Utility Program is available on the disk.
1. Place the ESTeem Utility CD in your CD-ROM drive. The CD
will auto load the ESTeem main page (Figure 1).
2. If the page does not auto load, open your web browser and set
your address line to D:\1_default.html (Where D: is the drive
letter for your CD-ROM drive).
3. From navigation menu on the left side of the page, select
ESTeem Utilities (Figure 1).
4. Select the Windows version of the ESTeem Utility and click
Download Windows Utility for Model 192 Series. When asked
to Open or Save the file, press Open to view the contents of the
Zip file.
RS-232C Interface Cable
(EST P/N AA061)
12 VDC Power Supply
(EST P/N AA174)
2 Pin Molex
Connector
ESTeem Model 192
Front View
ESTeem Model 192 Utility
Software Windows Version
Computer Running
Windows 95/98/NT
TNC Male
Connector
Magnetic Mount Antenna
(Consult Appendix B for
antenna type)
Figure 1: Installation Diagram
Figure 2: ESTeem Utility Setup Menu
Figure 3: ESTeem Utility Main Menu