User Manual Part 2

APPENDIX D
SOFTWARE COMMANDS
Revised: 13 Sep 05 APX D- 12 EST P/N AA104
TYPerr (on/off)
This command enables the Communication Error Messages.
ON: Enabled.
OFF: Disabled.
Factory default = OFF.
TYPSyste (on/off)
This command enables the System and Error Message Commands.
ON: Enabled.
OFF: Disabled.
Factory default = ON.
VERSION
This command will display the current software version being used by the ESTeem.
XHflow (on/off)
This command enables hardware flow control.
ON: Enabled.
OFF: Disabled.
Factory default = OFF.
XSflow (on/off)
This command enables software flow control.
ON: Enabled.
OFF: Disabled.
Factory default = ON.