User's Manual
Table Of Contents
- 195Ea Chapter 0 - Front Cover 195Ea
- 195Ea Chapter 0 - Table of Contents
- 195Ea Chapter 1 - Introduction
- 195Ea Chapter 2 - Starting Out
- 195Ea Chapter 3 - Example Applications
- 195Ea Chapter 4 - Utilities and Features
- 195Ea Chapter 5 - Web Configuration Manager
- 195Ea Chapter 6 - Serial Configuration and Applications
- 195Ea Chapter 7 - Repeating and Mesh Networking
- 195Ea Chapter 8 - Antenna Setup
- 195Ea Apx A - FCC Information
- 195Ea Apx B - Specifications
- 195Ea Apx C - Interface Ports
- 195Ea Apx D - Radio Configuration
- 195Ea Apx E - Security
- 195Ea Apx F - Troubleshooting
CHAPTER 3
EXAMPLE APPLICATIONS
Revised: 6 Sep 11 3-5 EST P/N AA107A
PROGRAMMING EXAMPLES
Once the mode of operation for the ESTeem has been
determined, you are now ready to program the Model 195Ea for
use. ESTeem has created a simplified network programming
utility call the ESTeem Network Configuration (ENC) Utility. This
ENC Utility will be used in all the following programming
examples. For detailed instructions on installing the ENC Utility,
please refer to the User’s Guide (found in the ESTeem Resource
CD or Utility program itself) or Chapter 4 of this User’s Manual
Adding ESTeems to ENC Utility and Changing Name
Each of the example applications will use the following procedure to add and rename ESTeem 195Ea’s.
1. Consult the ENC Utility’s User Guide on how the create a new wireless network. Once you have a blank
network configuration page (Figure 6), select , select ESTeem from the menu items to display the drop down
menu, then select New>New ESTeem.
2. Enter in the ESTeem Model 195Ea serial numbers used for
the example (for example enter E-14000 in the Set Serial
Number Box) and press the OK button (Figure 7). The ENC
Utility will look up the ESTeem 195Ea’s serial number in the
database and match the correct Wireless LAN MAC (WLAN
MAC) address to the modem. This WLAN MAC address will
be displayed above the modem symbol on the screen (Figure
8).
Technical Tip: The ENC Utility calculates the
wireless link information based upon exact
ESTeem serial numbers. The serial numbers
listed in the following examples are for example
only. Enter the correct ESTeem serial numbers
for your application.
Figure 6: Adding ESTeem to Blank ENC Configuration Page
Figure 7: Enter the Serial Number