User's Manual
Table Of Contents
- 195Ea Chapter 0 - Front Cover 195Ea
- 195Ea Chapter 0 - Table of Contents
- 195Ea Chapter 1 - Introduction
- 195Ea Chapter 2 - Starting Out
- 195Ea Chapter 3 - Example Applications
- 195Ea Chapter 4 - Utilities and Features
- 195Ea Chapter 5 - Web Configuration Manager
- 195Ea Chapter 6 - Serial Configuration and Applications
- 195Ea Chapter 7 - Repeating and Mesh Networking
- 195Ea Chapter 8 - Antenna Setup
- 195Ea Apx A - FCC Information
- 195Ea Apx B - Specifications
- 195Ea Apx C - Interface Ports
- 195Ea Apx D - Radio Configuration
- 195Ea Apx E - Security
- 195Ea Apx F - Troubleshooting
CHAPTER 3
EXAMPLE APPLICATIONS
Revised: 6 Sep 11 3-15 EST P/N AA107A
ROUTER ADDRESSING EXAMPLES
The following are examples of the IP addressing and subnets required for the ESTeem Router modes.
Point to Point Access Point Router to Station Router
AP Router
Wireless IP Address: 172.16.1.6
Netmask: 255.255.0.0
Default Route: 172.17.1.6
Ethernet IP Address: 172.17.1.6
Netmask: 255.255.0.0
Static Route: 172.20.0.0
255.255.0.0
gateway: 172.16.2.22
Station Router
Wireless IP Address: 172.16.2.22
Netmask: 255.255.0.0
Default Route: 172.16.1.6
Ethernet IP Address: 172.20.2.22
Netmask: 255.255.0.0
Device
IP address: 172.17.X.X
Netmask: 255.255.0.0
Default gateway 172.17.1.6
Device
IP address: 172.20.X.X
Netmask: 255.255.0.0
Default gateway 172.20.2.22
Figure 27: AP Router Addressing Example