User's Manual Part 1

CHAPTER 3
STARTING OUT
Revised: 27 Jun 08 3-2 EST P/N AA107D
Notes:
• There is no Power On/Off switch on the Model 195Ed.
• Attach the programming Cable to the RS-232 Programming Port and the Patch Cable between the Power Supply and
Ethernet port.
• One word of caution, always attach an antenna to Port A (Figure 2) on the Model 195Ed before power up.
12 VDC Input
(Auxiliary
Connector )
Reset Switch
RS-232
Configuration
RJ-45 10/100BaseT
Ethernet Port
Transmit
LED
Receive
LED
Status
LED
Power over
Ethernet LED
Aux Power
LED
RS-232
Data Port
Second
Ethernet
Port
Figure 1: 195Ed Front Panel Overview
Antenna Connectors
(TNC Female-RP)
Antenna Port A
(Single Receive Antenna)
Antenna Port B
(Dual Receive Antennas)
Figure 2: 195Ed Antenna Overview
(Optional)