User's Manual

CHAPTER 5
EXAMPLE CONFIGURATIONS
Revised: 23 Jan 08 5-12 EST P/N AA107G
Figure 18 displays the complete repeater peer list with both repeater peer entries. Set Enable repeater capability to Yes and to
both repeater paths. This Access Point Router 195Eg is also the primary data path for all Ethernet traffic on the network and
will also need to be configured as the Root Bridge. Press the Next button to continue.
13. Figure 19 will be displayed. If no further changes are necessary to the modem, you can commit the changes that will then be
saved and the modem rebooted.
Figure 18: Completed Repeater Peer List
Figure 19: Commit Changes