User's Manual

CHAPTER 5
EXAMPLE CONFIGURATIONS
Revised: 23 Jan 08 5-14 EST P/N AA107G
3. Enter the bridge IP Address and IP Netmask for the Model 195Eg. You will notice that for the 195Eg in AP Bridge mode only
a single IP address in entered. Both the ethernet IP and wireless IP addresses will be the same in the bridge mode. Reference
Figure 22.
4. Enter the default route (Gateway) address for the network. For Ethernet devices on the wireless network (IP 172.16.X.X – See
Figure 3), the AP Router 195Eg will be the gateway. Enter the wireless IP address for the AP Router 195Eg (configured in
Example 1) and any DNS server information. If you are not connecting the Model 195Eg to the Internet, leave blank and press
the Next button. Figure 23.
Figure 22: Bridge IP Addresses
Figure 23: Default Route (Gateway) and DNS Configuration