User's Manual

CHAPTER 5
EXAMPLE CONFIGURATIONS
Revised: 23 Jan 08 5-4 EST P/N AA107G
Note: Throughout the Configuration Manager are Help Screens that can accessed for further information on each item.
2. Select if you want to use client or server Dynamic Host Configuration Protocol (DHCP) for the Ethernet device. If you want to
enter a static IP address for the Model 195Eg, select Off and press the Next button. For our example, we have fixed IP
addresses and will select Off. For more information on the operation and configuration of DHCP, please refer to Appendix C –
Interface Ports. Reference Figure 5.
3. Refer to the site documentation (Table 1) and enter the IP Address and IP Netmask for the Model 195Eg on the Ethernet port.
Reference Figure 6.
Figure 5: DHCP Ethernet Port
Figure 6: Ethernet IP Addressing